Lax.com Canadian Mesh

This mesh is ok it has great hold and I didnt find it hard to break in I just boiled and it turned soft but still had the hard coating on it. What I fond to be really annoying is how heavy it is I have a Rabil X and it feels like there a 2 pound weight on it from this mesh

Is this good or bad

Is this mesh good or bad is it hard or soft

Were do you get Canadian soft mesh and would it be good for a d pole middie?

it doesn't really make sense cause the pic of the black mesh is actually all the colours of mesh!

Is it hard or soft

or copy and paste it..

Yes there is canadian soft mesh and its amazing

dude there is no soft canadian mesh....

i have it on my box cross

where can i find canadian soft mesh

Comlax

BEFORE STRINGING: Soak in water for 30 min. and then take it out and stretch it out. Rub hair conditioner onto it and get it into the fibers. Let it sit for 10 min. and shower the conditioner off. Soak in water again for 15 min. AFTER STRINGING: Get a pencil and shove it in between the sidewall and the sidewall string wherever you want your pocket. dip the mesh into water for a minute. Get a ball and put it under the pencil, so the pencil pushes the ball into a pocket. Let it sit for a few hours, then get the mesh wet again and put the ball back in. Let it sit overnight, and you got yourself a pretty good pocket without playing yet. (The rest of the breaking in process will take place when you're actually playing.)

before you string it roll the mesh up 3/4 of the way and stretch it out. and after that it it will barley take any breaking in.

I bought some of this at a tournament, it'll take some hot water and a good hour session of wall ball to break in, but its amazing. Shot speed with this is wicked and depending how u string it can have a load of hold. U will need to redo all the sidewalls and top a couple times when it finally breaks in, don't cut ur string

hard mesh not canadian or 6 diamond

what kind of mesh should i get to string a emcee whipit.

the color fades really quick if u get colored

Do not buy. This mesh has zero hold on it, and takes forever to break in. The hold is so bad that if I were to bring the stick from my front to passing position, it will fly out.

I just got some and the hold is wicked. Stop lying to yourself.

its all about how you string it, I had the same problem.

what mesh should i get for my revo x for defense??? ***No soft mesh suggestions, i hate it***

this comes with shooting strings right?

no just the mesh

is this good4 shooting?

does the color fade from this mesh

which is better six diamond or hard 10 diamond

you cant face off with this mesh but other than that its freakin amazing

why cant you faceoff with it

ball gets stuck

Is canadian soft better than canadian?

Yes it is so much better and easer to break in

Is this good for my super power

I have this mesh on one ofmy old heads it freakin sucks ass I has put easily 90 hours on the head and the mesh refuses to break in i would only suggest it for a back up rainy day stick

actually if you pour fabric softener on the mesh then go wall ball or play catch for about an hour or two the pocket and mesh will break in very nicely

what is really the difference between this and hardmesh I asked my coach and he had no idea. lmao

This is thicker and has a wax coating

Canadan mesh is amazing but get the color u want because it has an outer wax coating

I like a lot of whip is hard mesh good

soft mesh is the main thing for whip i rocommend the stringershack mesh to this just google stringershack

is this better then hard mesh .. whats the differance

suck it

Swallow it

then poop it out

then eat it.

repeat

just got royal blue, its hard as a rock.

thats what she said

Canadian mesh is allright...takes awile to break in, but gives a great hold and shot.... American Mesh i think is super....I have special MESH BUTTER i put on it and makes it into Marc Mesh...The stuff is insane.....By itself the American Mesh is twice as thick as 10D Hard and Its very durable....shot speed isnt the greatest but is ok and hold is superb!!

where did u get mesh butter

Haha so funny @$$ hol3

Is this mesh good for a Goalie to use or is this used for only def and atk sticks?

would this work good with my brine cluch cuz i need to restring my stick and i play mid field

I've realized after buying this its not real canadian. Can anyone tell me where I can get the real stuff, cause this is really different.

Madlax

Theres a rough side and a smooth side to the mesh, which side goes on the inside where the ball touches?

Did you just answer your own question?

does it come with strings to tie on the meh?

no it doesnt

is this good

Would this mesh work good with an EVO 2.0 head?

Which mesh is better catapultion mesh or marc mesh and tell why it is

can this stuff really withstand through fire? sounds a little egzagerated

is says excluding fire not including

should i get this now, our regular season is over, but i still have allstars so will this mesh wear out by fallball?

get it during off season because takes a while to break in but if u want it now get itt strung with lose sidewalls and if that dont work wet it put a knife through sidewalls and leave it there overnight

Put the ball in there forgot to say that

isnt this just a thicker version of hard mesh?

yes

for protection from rain.

i do faceoffs, when you push this mesh back in your stick, then go to scoop the ball (after the faceoff), is it quite hard to scoop the ball because the mesh is so stiff? Chur

you need to get some canadian soft mesh man

that just American mesh?

nah its think mesh rly thick but tis not hard

or Warrior hard mesh?

this mesh is the best. after you string your stick, wait for a rainy day to break it in. then practice in the rain for about an hour just catching and throwing and go home and sape it then let it dry. PERFECT!

side wall string or is it just mesh

Just mesh.

i dont know if it makes a difference, but does the smooth part of the mesh go where the ball is going to be, or does it face out?

rougher side is the side that you want the ball to be touching when done stringing.. its grippy for more hold

This is so much better than hard for any1 wondering... even if this is harrrrrddd to break in, even the first day it's on you can get a sick sweets spot pocket. And if you want to know how to make a good pocket easy, push the ball in as far as you can and hold it for 30 sec so it will stay that was for like 10 sec. before it gets smaller stick a pencil under the sidewall on top of the ball and above the mesh if u know what i mean.

i wanted to get this or hard but did not know if it would be worth saving 3$

Canadian mesh is way better plus who cares about saving 3$.

What is the difference between this and american mesh?

American mesh has no coating, and therefore is just extra thick soft mesh.

whats a better choice to get??

Hard will break in easily, and is very light compared to canadian, but when your playing in wet weather you will have to worry about the pocket sagging to illegality, and it will eventually lose almost all of it's stiffness. Canadian takes forever to break in, and is pretty heavy, but you won't have to worry about it ever changing in any type of weather, and it will not soften up nearly as much.

well then what is better hard mesh or canadian mesh??

If you make sure to stretch the crap out canadian mesh, and beat the crap out of the area you want the pocket to be then canadian mesh is. It takes a long time get the pocket to be truly set. It may seem like it's set for a little while, but will go back to the way it was unless you properly beat the crap out of it and leave a ball that's a little bigger than legal in the pocket for like a week. You'll have to run it under hot water once a day, and after that if it still isn't set then keep at it, once it is truly set this mesh will not lose it's shape.

canadian mesh

its really all personal opinion, i have it on my stick and love it but many of the guys on my team oppose it. Id recommend but try it first so you know what you're getting

With this mesh if you want to get it as close to hard mesh as possible you need to 1, streach the hell ut of it or 2, put it in the washer machine on delicate, it wont make it the same as hard mesh otherwise that would be a complete waste but it will break the coating enough to hold up in rain and what not but not shrink on you after a few games like it has for some of you in th past, you need to MAKE SURE YOU STREACH THE MESH BEFORE PUTTING IT IN THE WASHER, THAT WAY IT WILL SAVE YOU A STEP WHEN STRINGING AND WILL REALLY GET ALL OF THE COATING LOOSENED UP.

got it for my xcalibur thinking okay gerat, i can dunk this thing underwater and like tape rock in it and the pocket will still remain immaculate. that didnt really happen. it made a nice pocket to begin with, but after several games, it like solidified into a shallower pocket and kinda shrunk from there. wouldnt really recommend, i like regular hard mesh better

how long would it take to make a pocket with this mesh?

this is the best mesh it has alot of hold if u string it right and its easy to brake in with water

This is NOT the real canadian mesh!!!! Real canadian mesh only comes in white and its not hard, its a very thick layer of soft...if you string it right, it works very nice and is great. I strung a head yesterday with canadian mesh, and its awesome...i broke it in in a few hours!

i bought yellow canadian mesh from here and the first day i used it, it rained and now i have a huge lip. Does anyone no how to fix it

yeah, you should have bought a different color mesh. yellow always has lip!

ok ive been hearin that canadian mesh is REALLY good is it better than traditional hard mesh???

marc mesh and duramesh are the best by far

how hard is it to break in?

i got this in white and it took about 3 weeks to break in but after that it was great didn't have a lip in rain or the snow

It is really easy if you string it right. If it is strung right then if is the best mesh

During the season when your playing everyday, if you put a ball in with a pen every night or use a pocket pounder after practive you can do it in a few days. If you just play with it it will take like 3 weeks.

I play D and need to restring my stick. What is the best mesh?

Get some 6D I just strung it on my proton. It has the most hold out of all the other meshes. Trust me get it.

I use to play with traditional on my razor but I was thinking of switching to Canadian what should I do?

i like traditional its really good but if your were going to switch i would go for six dimond not candian

get the pocket wet under warm water and pound it, it makes a sweet natural pocket

(this may be long and difficult just do it and it will make ur pocket awsome) All u guys have to do to make the pocket bigger R these 3 steps (1)run the mesh (with it already strung) under hot water (2)bound a ball in it to desired depth (3) put a pocket stretcher (leaning to front)in it with a ball in the back (but u guy wont under stand step3) so just get 4 wooden pencilesand 2 balls put 1 ball under under ur last string and 2 penciles on the ball to hold ball in Then put the other ball at back and dosame thing with the penciles and let air dry For better pocket in between step 1and 2 get "vo5" strawberry and cream conditioner and rub in mesh

is there any places were u can get real canadian mesh online anywhere.

Canada hahaha just kidding

This is hard Canadian!! Don't Buy!!

dude your a stupid ass. i think in the description Canadian Mesh is the coated hard mesh" pretty much puts it right infront of your face that its hard. way to pay attention.

first of all real canadian only comes in white and is soft, the hard version is more american style. and canadian is sick if you want a real piece go to nickell city sports, but it can suck if you cant string good.

are you from buffalo?

well i am, i was gonna ask riotlax the same thing. haha dmaster, im guessin you are too?>

were u guys go to school cuz sweet home kills all

North Tanawanda's what its all about

i have real canadian and my friend used to have this. he didnt even have it for very long and it ripped. the real is much better.

that was my canadian brother

hyoueh...hyou come to cAnada...uhhhh...hyea.. ey

personally i would not buy this, it doesnt look like the real stuff, this looks harder than canadian

It is, it is insane hard to form a pocket with this

Alright..I'm thinking about getting either a Clutch or an Answer. Should I get Canadian, Duramesh, or Hard Mesh? Whats the difference between Dura and Hard? Also, does anyone know of some sites that have good instructions on stringing Canadian/Dura/Hard Mesh with a nice pocket and medium whip? Thanks.

if u run a ball up and down the mesh, by hand, once it strung it softens this and hard mesh up fairly quick

dont get the answer it pinches too easily. i got the clutch with hard mesh and its my baby!

get the clutch with canadian mesh thats what i have now and its amazing

does that little bit of extra hardness really do anything... it cant be much of an advantage over regular hard mesh

all mesh loses some of it's hardness over time, but this stuff stays harder longer, lasts longer because of the thickness, and most importantly is hardly affected by wet weather. But good luck changing pocket location once it has been set.

I was wondering if half of you guys even own sticks. First off this mesh is redicalously hard. It makes for a faster shot. Now if you know how to string a head right then you wont complain about your pocket because the way you do your sidewall is about 80% of your pocket. You might have to tighten up your sidewalls after playing for a while but thats about it. go to e-lacrosse and learn how to string, or just mess around and play with it for a few hours, then youll be stringing pearls for your whole team. Later

true

no, not really, I start. But, my stringing could use work...

I got a stick it's the swizzbeats with the edge x head how's that

i've tried hard, soft, 6D, and catapulation. and this tops them all it stands up to everything. i'll never switch to other mesh again.

your the pric from the lacrosse forums buddy everyone knows lax.com has fake canadian mesh god damnit so haha you prick

no this is canadian hard mesh. its not fake its just the harder kind of canadian soft mesh.

wats this.is it like 6d

why do you say this is canadian whne its not canadian isnt double hard its double medium mesh stop saying this is canadain besides canadian only comes in white

this mesh is bad as hell but hard to breck in

Canadian mesh doesn't come in colors. Only is white. This is capulation mesh!

This is the best mesh i have ever used and it last forever

if you have a well balenced stick do not buy this. Since its double the thickness of normal mesh it soaks up water like crazy and gets to b like 80000 lbs. NO GOOD!!!!

it really does but mine hasn't changed in the rain yet so i don't care. Oh and i really can't feel a difference because my stick is already heavy as crap