| - Mr. Mclovin72 5/13/12 reply|
Were do you get Canadian soft mesh and would it be good for a d pole middie?
| - LAXBRO21220 4/07/12 reply|
it doesn't really make sense cause the pic of the black mesh is actually all the colours of mesh!
| - lvanl 3/05/12 reply|
Yes there is canadian soft mesh and its amazing
| - ERay 12/21/11 reply|
i have it on my box cross
| - startlaxing77 7/10/11 reply|
BEFORE STRINGING: Soak in water for 30 min. and then take it out and stretch it out. Rub hair conditioner onto it and get it into the fibers. Let it sit for 10 min. and shower the conditioner off. Soak in water again for 15 min.
AFTER STRINGING: Get a pencil and shove it in between the sidewall and the sidewall string wherever you want your pocket. dip the mesh into water for a minute. Get a ball and put it under the pencil, so the pencil pushes the ball into a pocket. Let it sit for a few hours, then get the mesh wet again and put the ball back in. Let it sit overnight, and you got yourself a pretty good pocket without playing yet. (The rest of the breaking in process will take place when you're actually playing.)
| - laxin panda 6/27/11 reply|
before you string it roll the mesh up 3/4 of the way and stretch it out. and after that it it will barley take any breaking in.
| - charger20085563 4/24/11 reply|
I bought some of this at a tournament, it'll take some hot water and a good hour session of wall ball to break in, but its amazing. Shot speed with this is wicked and depending how u string it can have a load of hold. U will need to redo all the sidewalls and top a couple times when it finally breaks in, don't cut ur string
| - LAX BRO 8 3/13/11 reply|
what kind of mesh should i get to string a emcee whipit.
| - ljbennett40 9/15/10 reply|
Do not buy. This mesh has zero hold on it, and takes forever to break in. The hold is so bad that if I were to bring the stick from my front to passing position, it will fly out.
| - startlaxing77 7/11/11 reply|
I just got some and the hold is wicked. Stop lying to yourself.
| - DAyzed 4/23/13 reply|
its all about how you string it, I had the same problem.
| - cdrulezatlax 7/24/10 reply|
what mesh should i get for my revo x for defense???
***No soft mesh suggestions, i hate it***
| - firelax_18 6/01/10 reply|
you cant face off with this mesh but other than that its freakin amazing
| - liv 5/01/10 reply|
Is this good for my super power
| - steste9357 4/30/10 reply|
I have this mesh on one ofmy old heads it freakin sucks ass I has put easily 90 hours on the head and the mesh refuses to break in i would only suggest it for a back up rainy day stick
| - packlax38 7/23/10 reply|
actually if you pour fabric softener on the mesh then go wall ball or play catch for about an hour or two the pocket and mesh will break in very nicely
| - Tommyvbc321 3/30/10 reply|
what is really the difference between this and hardmesh I asked my coach and he had no idea. lmao
| - elihealy96 2/23/10 reply|
Canadan mesh is amazing but get the color u want because it has an outer wax coating
| - Lacrosse_1 2/15/10 reply|
is this better then hard mesh .. whats the differance
| - dmg18t 11/18/09 reply|
Canadian mesh is allright...takes awile to break in, but gives a great hold and shot....
American Mesh i think is super....I have special MESH BUTTER i put on it and makes it into Marc Mesh...The stuff is insane.....By itself the American Mesh is twice as thick as 10D Hard and Its very durable....shot speed isnt the greatest but is ok and hold is superb!!
| - ZayXan 9/23/09 reply|
Is this mesh good for a Goalie to use or is this used for only def and atk sticks?
| - stonewall3131 8/12/09 reply|
would this work good with my brine cluch cuz i need to restring my stick and i play mid field
| - D-Rex 8/11/09 reply|
I've realized after buying this its not real canadian. Can anyone tell me where I can get the real stuff, cause this is really different.
| - Tay-Sachs 8/01/09 reply|
Theres a rough side and a smooth side to the mesh, which side goes on the inside where the ball touches?
| - benlax14 7/22/09 reply|
does it come with strings to tie on the meh?
| - wave04 6/28/09 reply|
Would this mesh work good with an EVO 2.0 head?
| - rebellax2 6/14/09 reply|
Which mesh is better catapultion mesh or marc mesh and tell why it is
| - bamalax_middie#1 5/17/09 reply|
can this stuff really withstand through fire? sounds a little egzagerated
| - bamalax_middie#1 5/12/09 reply|
should i get this now, our regular season is over, but i still have allstars so will this mesh wear out by fallball?
| - gaelslax49 5/14/09 reply|
get it during off season because takes a while to break in but if u want it now get itt strung with lose sidewalls and if that dont work wet it put a knife through sidewalls and leave it there overnight
| - laxnz 4/19/09 reply|
i do faceoffs, when you push this mesh back in your stick, then go to scoop the ball (after the faceoff), is it quite hard to scoop the ball because the mesh is so stiff? Chur
| - jameskidd 4/06/09 reply|
this mesh is the best. after you string your stick, wait for a rainy day to break it in. then practice in the rain for about an hour just catching and throwing and go home and sape it then let it dry. PERFECT!
| - beale 3/25/09 reply|
side wall string or is it just mesh
| - dolphin04721 3/25/09 reply|
i dont know if it makes a difference, but does the smooth part of the mesh go where the ball is going to be, or does it face out?
| - hocktigers 4/10/09 reply|
rougher side is the side that you want the ball to be touching when done stringing.. its grippy for more hold
| - COLEinONE 3/10/09 reply|
This is so much better than hard for any1 wondering...
even if this is harrrrrddd to break in, even the first day it's on you can get a sick sweets spot pocket. And if you want to know how to make a good pocket easy, push the ball in as far as you can and hold it for 30 sec so it will stay that was for like 10 sec. before it gets smaller stick a pencil under the sidewall on top of the ball and above the mesh if u know what i mean.
| - hamburg49 2/19/09 reply|
i wanted to get this or hard but did not know if it would be worth saving 3$
| - laxinitup22 1/14/09 reply|
What is the difference between this and american mesh?
| - clutchattack3 2/04/09 reply|
American mesh has no coating, and therefore is just extra thick soft mesh.
| - clutchattack3 2/04/09 reply|
Hard will break in easily, and is very light compared to canadian, but when your playing in wet weather you will have to worry about the pocket sagging to illegality, and it will eventually lose almost all of it's stiffness.
Canadian takes forever to break in, and is pretty heavy, but you won't have to worry about it ever changing in any type of weather, and it will not soften up nearly as much.
| - chiefslax00 11/03/08 reply|
well then what is better hard mesh or canadian mesh??
| - clutchattack3 2/04/09 reply|
If you make sure to stretch the crap out canadian mesh, and beat the crap out of the area you want the pocket to be then canadian mesh is.
It takes a long time get the pocket to be truly set. It may seem like it's set for a little while, but will go back to the way it was unless you properly beat the crap out of it and leave a ball that's a little bigger than legal in the pocket for like a week. You'll have to run it under hot water once a day, and after that if it still isn't set then keep at it, once it is truly set this mesh will not lose it's shape.
| - supahshark77 9/28/08 reply|
its really all personal opinion, i have it on my stick and love it but many of the guys on my team oppose it. Id recommend but try it first so you know what you're getting
| - RLdefender19 9/19/08 reply|
With this mesh if you want to get it as close to hard mesh as possible you need to 1, streach the hell ut of it or 2, put it in the washer machine on delicate, it wont make it the same as hard mesh otherwise that would be a complete waste but it will break the coating enough to hold up in rain and what not but not shrink on you after a few games like it has for some of you in th past, you need to MAKE SURE YOU STREACH THE MESH BEFORE PUTTING IT IN THE WASHER, THAT WAY IT WILL SAVE YOU A STEP WHEN STRINGING AND WILL REALLY GET ALL OF THE COATING LOOSENED UP.
| - HGPLax12 8/20/08 reply|
got it for my xcalibur thinking okay gerat, i can dunk this thing underwater and like tape rock in it and the pocket will still remain immaculate. that didnt really happen. it made a nice pocket to begin with, but after several games, it like solidified into a shallower pocket and kinda shrunk from there. wouldnt really recommend, i like regular hard mesh better
| - Stevy16 8/12/08 reply|
how long would it take to make a pocket with this mesh?
| - willis94 7/16/08 reply|
this is the best mesh it has alot of hold if u string it right and its easy to brake in with water
| - faceoff93 6/27/08 reply|
This is NOT the real canadian mesh!!!! Real canadian mesh only comes in white and its not hard, its a very thick layer of soft...if you string it right, it works very nice and is great. I strung a head yesterday with canadian mesh, and its awesome...i broke it in in a few hours!
| - shlax17 6/17/08 reply|
i bought yellow canadian mesh from here and the first day i used it, it rained and now i have a huge lip. Does anyone no how to fix it
| - SJLAX33 6/25/08 reply|
yeah, you should have bought a different color mesh. yellow always has lip!
| - MNlaxbro99 6/12/08 reply|
ok ive been hearin that canadian mesh is REALLY good
is it better than traditional hard mesh???
| - shlax17 6/07/08 reply|
i got this in white and it took about 3 weeks to break in but after that it was great didn't have a lip in rain or the snow
| - FuzeLax5 8/19/08 reply|
It is really easy if you string it right. If it is strung right then if is the best mesh
| - coltlacrosse 3/10/09 reply|
During the season when your playing everyday, if you put a ball in with a pen every night or use a pocket pounder after practive you can do it in a few days. If you just play with it it will take like 3 weeks.
| - gollywobbler 5/29/08 reply|
I play D and need to restring my stick. What is the best mesh?
| - GuitarnLax36 5/30/08 reply|
Get some 6D I just strung it on my proton. It has the most hold out of all the other meshes. Trust me get it.
| - rush2112sryinx 5/28/08 reply|
I use to play with traditional on my razor but I was thinking of switching to Canadian what should I do?
| - ∆ø∆ 5/28/08 reply|
i like traditional its really good but if your were going to switch i would go for six dimond not candian
| - redheadlax 5/21/08 reply|
get the pocket wet under warm water and pound it, it makes a sweet natural pocket
| - Stix guru 5/04/08 reply|
(this may be long and difficult just do it and it will make ur pocket awsome)
All u guys have to do to make the pocket bigger R these 3 steps
(1)run the mesh (with it already strung) under hot water
(2)bound a ball in it to desired depth
(3) put a pocket stretcher (leaning to front)in it with a ball in the back (but u guy wont under stand step3) so just get 4 wooden pencilesand 2 balls put 1 ball under under ur last string and 2 penciles on the ball to hold ball in Then put the other ball at back and dosame thing with the penciles and let air dry
For better pocket in between step 1and 2 get "vo5" strawberry and cream conditioner and rub in mesh
| - kevinking 1/25/09 reply|
dude your a stupid ass. i think in the description Canadian Mesh is the coated hard mesh" pretty much puts it right infront of your face that its hard. way to pay attention.
| - RIOTLAX 4/10/08 reply|
first of all real canadian only comes in white and is soft, the hard version is more american style. and canadian is sick if you want a real piece go to nickell city sports, but it can suck if you cant string good.
| - sonyboysunnyday 5/04/08 reply|
well i am, i was gonna ask riotlax the same thing. haha dmaster, im guessin you are too?>
| - shlax17 6/17/08 reply|
were u guys go to school cuz sweet home kills all
| - eagleslax11 4/06/08 reply|
i have real canadian and my friend used to have this. he didnt even have it for very long and it ripped. the real is much better.
| - pbandjman11 3/01/08 reply|
personally i would not buy this, it doesnt look like the real stuff, this looks harder than canadian
| - LAXinIN 2/22/08 reply|
Alright..I'm thinking about getting either a Clutch or an Answer. Should I get Canadian, Duramesh, or Hard Mesh? Whats the difference between Dura and Hard?
Also, does anyone know of some sites that have good instructions on stringing Canadian/Dura/Hard Mesh with a nice pocket and medium whip?
| - booter30 3/26/08 reply|
if u run a ball up and down the mesh, by hand, once it strung it softens this and hard mesh up fairly quick
| - lilbigman1055 4/30/08 reply|
dont get the answer it pinches too easily. i got the clutch with hard mesh and its my baby!
| - laxitup21 7/16/09 reply|
get the clutch with canadian mesh thats what i have now and its amazing
| - schachner 2/20/08 reply|
does that little bit of extra hardness really do anything... it cant be much of an advantage over regular hard mesh
| - clutchattack3 3/04/08 reply|
all mesh loses some of it's hardness over time, but this stuff stays harder longer, lasts longer because of the thickness, and most importantly is hardly affected by wet weather. But good luck changing pocket location once it has been set.
| - laxstar9599 2/13/08 reply|
I was wondering if half of you guys even own sticks. First off this mesh is redicalously hard. It makes for a faster shot. Now if you know how to string a head right then you wont complain about your pocket because the way you do your sidewall is about 80% of your pocket. You might have to tighten up your sidewalls after playing for a while but thats about it. go to e-lacrosse and learn how to string, or just mess around and play with it for a few hours, then youll be stringing pearls for your whole team.
| - Stringer101 4/14/08 reply|
no, not really, I start.
But, my stringing could use work...
| - Ft6969 12/31/07 reply|
i've tried hard, soft, 6D, and catapulation. and this tops them all it stands up to everything. i'll never switch to other mesh again.
| - BretMac 2/07/08 reply|
your the pric from the lacrosse forums buddy everyone knows lax.com has fake canadian mesh god damnit so haha you prick
| - laxitup21 7/16/09 reply|
no this is canadian hard mesh. its not fake its just the harder kind of canadian soft mesh.
| - BretMac 12/16/07 reply|
why do you say this is canadian whne its not canadian isnt double hard its double medium mesh stop saying this is canadain besides canadian only comes in white
| - kendrickgaston 8/13/07 reply|
Canadian mesh doesn't come in colors. Only is white. This is capulation mesh!
| - hatchling11 1/22/07 reply|
This is the best mesh i have ever used and it last forever
| - sk8man922 12/24/06 reply|
if you have a well balenced stick do not buy this. Since its double the thickness of normal mesh it soaks up water like crazy and gets to b like 80000 lbs.
| - laxpack1 4/13/08 reply|
it really does but mine hasn't changed in the rain yet so i don't care. Oh and i really can't feel a difference because my stick is already heavy as crap